How long will the Jackery Explorer 2000 v2 run a household refrigerator?
Can the Jackery Explorer 2000 v2 start a household refrigerator?
Yes. A typical household refrigerator draws about 190 W running and up to 1,200 W starting, both inside the Jackery Explorer 2000 v2’s published 2,200 W continuous and 4,400 W surge ratings. Your own unit’s nameplate can differ, so check it before relying on this.
How long will the Jackery Explorer 2000 v2 run a household refrigerator?
Plan on 21 hr to 26 hr for a typical household refrigerator at a 35% duty cycle, about 67 W on average. That range applies 0.70 and 0.85 usable-capacity factors to the Jackery Explorer 2000 v2’s 2,042 Wh, because inverter heat and battery management overhead consume the rest. Actual use depends on your own appliance and conditions.
Which station runs a household refrigerator longer than the Jackery Explorer 2000 v2?
The EcoFlow DELTA Pro 3 is the next meaningful step up we’ve verified, at 43 hr or more on the same household refrigerator using the same conservative 0.70 factor, against 21 hr here. Only stations that pass both the continuous and surge checks count as upgrades in the table below, so it’s a fair comparison.
| Station | Capacity | Cautious | Best case | Continuous | Surge |
|---|---|---|---|---|---|
| EcoFlow RIVER 2 Max 500 | 499 Wh | 5.3 hr | 6.4 hr | Pass | Fail |
| EcoFlow DELTA 3 Plus | 1,024 Wh | 11 hr | 13 hr | Pass | Pass |
| Jackery Explorer 1000 v2 | 1,070 Wh | 11 hr | 14 hr | Pass | Pass |
| BLUETTI AC180 | 1,152 Wh | 12 hr | 15 hr | Pass | Pass |
| Jackery Explorer 2000 v2 | 2,042 Wh | 21 hr | 26 hr | Pass | Pass |
| BLUETTI Elite 200 V2 | 2,073.6 Wh | 22 hr | 27 hr | Pass | Unverified |
| EcoFlow DELTA Pro 3 | 4,096 Wh | 43 hr | 2.2 days | Pass | Pass |
What load does this household refrigerator estimate assume?
These figures are typical values, not measurements of your unit. We assume 190 W running, 1,200 W starting and a 35% duty cycle for a household refrigerator. Models vary widely, so enter your nameplate figure in the calculator above for a number that fits your own appliance and how you use it.
190 W is the figure Anker uses for its F3000 fridge runtime claim. Compressor start surge varies widely, so 1,200 W is a cautious typical value.
