How long will the EcoFlow DELTA Pro 3 run a household refrigerator?
Can the EcoFlow DELTA Pro 3 start a household refrigerator?
Yes. A typical household refrigerator draws about 190 W running and up to 1,200 W starting, both inside the EcoFlow DELTA Pro 3’s published 4,000 W continuous and 8,000 W surge ratings. Your own unit’s nameplate can differ, so check it before relying on this.
How long will the EcoFlow DELTA Pro 3 run a household refrigerator?
Plan on 43 hr to 2.2 days for a typical household refrigerator at a 35% duty cycle, about 67 W on average. That range applies 0.70 and 0.85 usable-capacity factors to the EcoFlow DELTA Pro 3’s 4,096 Wh, because inverter heat and battery management overhead consume the rest. Actual use depends on your own appliance and conditions.
Which station runs a household refrigerator longer than the EcoFlow DELTA Pro 3?
None of the stations we’ve verified adds at least 25% more runtime than the EcoFlow DELTA Pro 3 here, at 43 hr or more, while also passing both checks. To go further, consider adding an expansion battery or solar input. The comparison below shows how every verified station handles the same household refrigerator.
| Station | Capacity | Cautious | Best case | Continuous | Surge |
|---|---|---|---|---|---|
| EcoFlow RIVER 2 Max 500 | 499 Wh | 5.3 hr | 6.4 hr | Pass | Fail |
| EcoFlow DELTA 3 Plus | 1,024 Wh | 11 hr | 13 hr | Pass | Pass |
| Jackery Explorer 1000 v2 | 1,070 Wh | 11 hr | 14 hr | Pass | Pass |
| BLUETTI AC180 | 1,152 Wh | 12 hr | 15 hr | Pass | Pass |
| Jackery Explorer 2000 v2 | 2,042 Wh | 21 hr | 26 hr | Pass | Pass |
| BLUETTI Elite 200 V2 | 2,073.6 Wh | 22 hr | 27 hr | Pass | Unverified |
| EcoFlow DELTA Pro 3 | 4,096 Wh | 43 hr | 2.2 days | Pass | Pass |
What load does this household refrigerator estimate assume?
These figures are typical values, not measurements of your unit. We assume 190 W running, 1,200 W starting and a 35% duty cycle for a household refrigerator. Models vary widely, so enter your nameplate figure in the calculator above for a number that fits your own appliance and how you use it.
190 W is the figure Anker uses for its F3000 fridge runtime claim. Compressor start surge varies widely, so 1,200 W is a cautious typical value.
