Jackery Explorer 1000 v2 with the Jackery SolarSaga 200W
Works, power is clipped · 1S1P · 189 W
The Jackery SolarSaga 200W has a DC8020 output, so it can’t be wired in series or parallel from its own leads. We evaluate one panel per port.
The array could make 207 W but this port delivers 189 W.
Thick mark: cold Voc · Thin mark: operating Vmp, 18.0 V
1 caveat
- Short-circuit current of 12.5 A is above the published 10.5 A limit. One string normally just clips at the limit, but the maker publishes no tolerance.
Parts for this layout
- Jackery Explorer 1000 v2$559 View on Amazon
- Jackery SolarSaga 200W$429 View on Amazon
Estimated total $988
Prices can change. The price on Amazon at purchase is what applies.
Can I connect the Jackery SolarSaga 200W to the Jackery Explorer 1000 v2?
Yes, with limits. The best setup is one panel wired 1S1P on DC 8mm Input 1, delivering up to 189 W. That string reaches 24.1 V at −10 °C against the port’s 60 V limit, using Jackery’s published -0.27 %/°C coefficient. Check your own unit’s labels too.
What is the best way to wire Jackery SolarSaga 200W panels to the Jackery Explorer 1000 v2?
Wire them 1S1P on DC 8mm Input 1 for about 189 W from one panel. The string runs at 18.0 V, above the 12 V minimum the port needs to start. Series count isn’t the limiting factor here within the layouts we tested.
| Port | Layout | Voc 25 °C | Voc 0 °C | Voc −10 °C | Voc −20 °C | Vmp | Isc | Watts | Verdict at −10 °C |
|---|---|---|---|---|---|---|---|---|---|
| DC 8mm Input 1 | 1S1P | 22.0 | 23.5 | 24.1 | 24.7 | 18.0 | 12.5 | 189 | Works, power is clipped |
| DC 8mm Input 2 | 1S1P | 22.0 | 23.5 | 24.1 | 24.7 | 18.0 | 12.5 | 189 | Works, power is clipped |
How cold can it get before this string overvolts the Jackery Explorer 1000 v2?
Cold doesn’t change the answer for this pair within our −25 °C test range. Using Jackery’s published -0.27 %/°C, each Jackery SolarSaga 200W panel rises from 22.0 V at 25 °C to 25.0 V at −25 °C, and that stays inside the 60 V limit of DC 8mm Input 1.
The cold-weather correction is the same one NEC Article 690.7 requires for PV system voltage.
Which cable connects the Jackery SolarSaga 200W to the Jackery Explorer 1000 v2?
You don’t need an adapter, because the Jackery SolarSaga 200W’s DC8020 output plugs straight into the DC8020 port. Confirm the plug against your own station’s port, and check polarity before first use. Keep runs short, because voltage drop grows with current and distance.
How long does the Jackery SolarSaga 200W take to recharge the Jackery Explorer 1000 v2?
Expect about 7.6 peak-sun hours for a full charge from one panel. That’s 1.2 days in Denver, CO in June and 1.7 days in December, using a 0.70 real-world derate and NREL irradiance data. Clouds, shade and panel angle can all push it longer.
| City | June | December |
|---|---|---|
| Phoenix, AZ | 1.0 | 1.4 |
| Denver, CO | 1.2 | 1.7 |
| Los Angeles, CA | 1.2 | 1.7 |
| Austin, TX | 1.3 | 1.8 |
| Miami, FL | 1.4 | 1.6 |
| Atlanta, GA | 1.4 | 2.0 |
| Chicago, IL | 1.4 | 2.9 |
| New York, NY | 1.5 | 2.7 |
| Seattle, WA | 1.5 | 4.8 |
Where do these Jackery Explorer 1000 v2 and Jackery SolarSaga 200W numbers come from?
Station limits come from jackery.com and panel ratings from jackery.com, each checked against a verbatim quote on that page. Panels must also pass a physics test: Vmp times Imp must land within 15% of rated watts. Anything failing goes to quarantine and gets no page.
| Rated power | 200 W | jackery.com“200W±5%” |
|---|---|---|
| Open-circuit voltage (Voc) | 22 V | jackery.com“22V±5%” |
| Operating voltage (Vmp) | 18 V | jackery.com“18V±5%” |
| Short-circuit current (Isc) | 12.5 A | jackery.com“12.5A±5%” |
| Operating current (Imp) | 11.5 A | jackery.com“11.5A±5%” |
| Voc temperature coefficient | -0.27 %/°C | jackery.com“-(0.27±0.03)%/°C” |
| Output connector | DC8020 | Amazon listing“a DC8020 * 1 port” |
| DC 8mm Input 1 | 12 to 60 V, 10.5 A, ? W | jackery.com“(2x) DC 8mm Ports: 12-16V(Working Voltage)⎓8A Max,” |
|---|---|---|
| DC 8mm Input 2 | 12 to 60 V, 10.5 A, ? W | jackery.com“(2x) DC 8mm Ports: 12-16V(Working Voltage)⎓8A Max,” |
| DC 8mm Input 1 connector | DC8020 | jackery.com“DC8020 input port” |
| DC 8mm Input 2 connector | DC8020 | jackery.com“DC8020 input port” |
Prices last checked and spec data verified on .