Jackery Explorer 2000 v2 with the Renogy 200W N-Type Portable
Works, with caveats · 2S1P · 399 W
Thick mark: cold Voc · Thin mark: operating Vmp, 37.6 V
1 caveat
- The maker publishes no temperature coefficient, so cold voltage uses our conservative −0.40 %/°C.
Parts for this layout
- Jackery Explorer 2000 v2$999 View on Amazon
- 2 × Renogy 200W N-Type Portable$439.98 View on Amazon
- Solar Connector to DC 8mm Adapter Cable, 2M 6.6FT 12AWG+14AWG Solar Cable with DC8020/7909 for Jackery Explorer 160 240 500 1000 GZ Yeti BLUETTI Portable Power Station, Solar Generator, Solar Panel$16.13 View on Amazon
Estimated total $1,455.11
Prices can change. The price on Amazon at purchase is what applies.
Can I connect the Renogy 200W N-Type Portable to the Jackery Explorer 2000 v2?
Yes, with limits. The best setup is 2 panels wired 2S1P on DC Input 1 (DC 8mm), delivering up to 399 W. That string reaches 49.2 V at −10 °C against the port’s 60 V limit, using our cautious cold-weather assumption because Renogy publishes no temperature coefficient. Check your own unit’s labels too.
Danger: overvoltage risk. Do not connect the layouts marked red below. Going over a station’s input voltage limit can permanently damage it.
What is the best way to wire Renogy 200W N-Type Portable panels to the Jackery Explorer 2000 v2?
Wire them 2S1P on DC Input 1 (DC 8mm) for about 399 W from 2 panels. The string runs at 37.6 V, above the 11 V minimum the port needs to start. Stop at 2 in series on the lowest-voltage port, because 3 in series exceeds its limit in the cold.
| Port | Layout | Voc 25 °C | Voc 0 °C | Voc −10 °C | Voc −20 °C | Vmp | Isc | Watts | Verdict at −10 °C |
|---|---|---|---|---|---|---|---|---|---|
| DC Input 1 (DC 8mm) | 1S1P | 21.6 | 23.8 | 24.6 | 25.5 | 18.8 | 11.3 | 199 | Works, with caveats |
| DC Input 1 (DC 8mm) | 1S2P | 21.6 | 23.8 | 24.6 | 25.5 | 18.8 | 22.6 | 226 | Over the current limit |
| DC Input 1 (DC 8mm) | 2S1P | 43.2 | 47.5 | 49.2 | 51.0 | 37.6 | 11.3 | 399 | Works, with caveats |
| DC Input 1 (DC 8mm) | 2S2P | 43.2 | 47.5 | 49.2 | 51.0 | 37.6 | 22.6 | 400 | Over the current limit |
| DC Input 1 (DC 8mm) | 3S1P | 64.8 | 71.3 | 73.9 | 76.5 | 56.4 | 11.3 | 0 | Danger: overvoltage |
| DC Input 1 (DC 8mm) | 4S1P | 86.4 | 95.0 | 98.5 | 102.0 | 75.2 | 11.3 | 0 | Danger: overvoltage |
| DC Input 2 (DC 8mm) | 1S1P | 21.6 | 23.8 | 24.6 | 25.5 | 18.8 | 11.3 | 199 | Works, with caveats |
| DC Input 2 (DC 8mm) | 1S2P | 21.6 | 23.8 | 24.6 | 25.5 | 18.8 | 22.6 | 226 | Over the current limit |
| DC Input 2 (DC 8mm) | 2S1P | 43.2 | 47.5 | 49.2 | 51.0 | 37.6 | 11.3 | 399 | Works, with caveats |
| DC Input 2 (DC 8mm) | 2S2P | 43.2 | 47.5 | 49.2 | 51.0 | 37.6 | 22.6 | 400 | Over the current limit |
| DC Input 2 (DC 8mm) | 3S1P | 64.8 | 71.3 | 73.9 | 76.5 | 56.4 | 11.3 | 0 | Danger: overvoltage |
| DC Input 2 (DC 8mm) | 4S1P | 86.4 | 95.0 | 98.5 | 102.0 | 75.2 | 11.3 | 0 | Danger: overvoltage |
How cold can it get before this string overvolts the Jackery Explorer 2000 v2?
A string of 3 Renogy 200W N-Type Portable panels breaches the 60 V limit of DC Input 1 (DC 8mm) even at 25 °C, before any cold correction. Voltage rises as cells cool, at our assumed −0.40 %/°C (no figure is published), so a clear winter sunrise is the worst case. Stay at 2 in series or fewer there.
The cold-weather correction is the same one NEC Article 690.7 requires for PV system voltage.
Which cable connects the Renogy 200W N-Type Portable to the Jackery Explorer 2000 v2?
You need an MC4 to DC8020 adapter cable, rated for at least 11.3 A, to connect this array’s output to DC Input 1 (DC 8mm). Confirm the plug against your own station’s port, and check polarity before first use. Keep runs short, because voltage drop grows with current and distance.
How long does the Renogy 200W N-Type Portable take to recharge the Jackery Explorer 2000 v2?
Expect about 7.3 peak-sun hours for a full charge from 2 panels. That’s 1.2 days in Denver, CO in June and 1.6 days in December, using a 0.70 real-world derate and NREL irradiance data. Clouds, shade and panel angle can all push it longer.
| City | June | December |
|---|---|---|
| Phoenix, AZ | 1.0 | 1.3 |
| Denver, CO | 1.2 | 1.6 |
| Los Angeles, CA | 1.1 | 1.6 |
| Austin, TX | 1.2 | 1.7 |
| Miami, FL | 1.4 | 1.5 |
| Atlanta, GA | 1.3 | 1.9 |
| Chicago, IL | 1.3 | 2.7 |
| New York, NY | 1.4 | 2.5 |
| Seattle, WA | 1.5 | 4.6 |
Where do these Jackery Explorer 2000 v2 and Renogy 200W N-Type Portable numbers come from?
Station limits come from jackery.com and panel ratings from renogy.com, each checked against a verbatim quote on that page. Panels must also pass a physics test: Vmp times Imp must land within 15% of rated watts. Anything failing goes to quarantine and gets no page.
| Rated power | 200 W | renogy.com“200 W” |
|---|---|---|
| Open-circuit voltage (Voc) | 21.6 V | renogy.com“21.6V” |
| Operating voltage (Vmp) | 18.8 V | renogy.com“18.8V” |
| Short-circuit current (Isc) | 11.3 A | renogy.com“11.3A” |
| Operating current (Imp) | 10.6 A | renogy.com“10.6A” |
| Voc temperature coefficient | −0.40 %/°C | Assumed: not published by the maker |
| Output connector | MC4 | renogy.com“MC4” |
| DC Input 1 (DC 8mm) | 11 to 60 V, 12 A, ? W | jackery.com“(2x) 2 x DC 8mm Ports: 11-16V⎓8A Max, Double to 8A Max;16-60V⎓12A, Double to 21A/400W Max” |
|---|---|---|
| DC Input 2 (DC 8mm) | 11 to 60 V, 12 A, ? W | jackery.com“(2x) 2 x DC 8mm Ports: 11-16V⎓8A Max, Double to 8A Max;16-60V⎓12A, Double to 21A/400W Max” |
| DC Input 1 (DC 8mm) connector | DC8020 | jackery.com“DC 8mm Ports” |
| DC Input 2 (DC 8mm) connector | DC8020 | jackery.com“DC 8mm Ports” |
Prices last checked and spec data verified on .